Chapter 4 — Troubleshooting and Maintaining the SF61B
72 SF61 Cordless Scanner User’s Guide
Download the Latest SF61B Firmware Version
To download the latest firmware upgrade package
1 Go to the SF61B section of the Intermec web site:
http://www.intermec.com/products/scansf61b/index.aspx
2 Open the Downloads tab.
3 Click the link to download the appropriate SF61B firmware
upgrade package for your SF61B model (1D or 2D) and save it to
your PC.
Disconnect any Existing Bluetooth Connection with
your SF61B
Firmware upgrade using EasySet and WinFlash requires a host-
initiated (Outgoing) SPP Bluetooth connection. If your SF61B is
currently connected to the host with another type of Bluetooth
connection, you will have to disconnect/deactivate that connection
before you perform the firmware upgrade procedure.
To disconnect your scanner from the host
1 If your SF61B is connected to the host, read the Bluetooth Device
Disconnect bar code to disconnect it.
Bluetooth Device Disconnect
2 Remove your SF61B from the host’s list of Bluetooth devices:
• Double-click the Bluetooth icon in the system tray, select your
scanner and click Remove device (or equivalent).
3 Close the host’s Outgoing COM port if it is open.
To Next Page
Loading...
