Chapter 4 — Troubleshooting and Maintaining the SF61B
70 SF61 Cordless Scanner User’s Guide
Using EasySet to Display Current Version Information
You can use EasySet to get version information if your SF61B is
connected using an HID connection or a host-initiated (Outgoing)
SPP connection.
To get version information by reading bar codes
1 Follow the procedure for online setup with EasySet (see Online
Setup with EasySet in Chapter 3).
2 When the scanner is connected to EasySet, open the
Configuration modes and utilities section in the EasySet
commands window.
The current firmware, subsystem and decode versions appear in
blue next to the Get firmware version, Get sub-system versions
and Get decode version commands.
To Next Page
Loading...
Need help?
General
