Chapter 2 — Connecting the SF61B
SF61 Cordless Scanner User’s Guide 37
3 Read the following test code and check that it is correctly
displayed by the host application to make sure that your
connection is working correctly:
Code 39 Test Bar Code
*123456*
*123456*
To disconnect from the host
1 Use the Bluetooth disconnect procedure specific to your host
application.
When the scanner disconnects from the host PC, it emits a
“disconnect successful” beep sequence (series of beeps from high
to low), and the blue Intermec Ready-to-Work indicator turns off
(default scanner behavior).
To Next Page
Loading...
