Interroll MultiControl Instruction Manual

Troubleshooting
Version 3.0 (08/2018)
52 Translation of original instruction manual
Error
Possible cause
Remedy
RollerDrive does not
rotate
RollerDrive not inserted or not
correctly inserted or
RollerDrive defective
➢ Make sure that the
power supply is within
the specified voltage
range
➢ Check connections and
correct if necessary
➢ If necessary, replace
the RollerDrive
Brake chopper overheats: the
application feeds too much
energy back or power supply
too high
➢ Let cool down
➢ Lower ambient
temperature if
necessary
➢ Make sure that the
power supply is within
the specified voltage
range

Interroll MultiControl Specifications

General

Power Supply	24 VDC
Rated Voltage	24 VDC
Storage Temperature	-20 °C to +70 °C
Communication Protocols	Ethernet/IP, PROFINET, EtherCAT, CANOpen
Number of Channels	4
Weight	0.5 kg