INVT Goodrive 200 - Page 158

Goodrive200 inverters Basic operation instruction
157
Set
value
Function Instructions
or decreasing.
34 DC braking
The inverter will begin DC braking after the valid
command.
35
Shifting between motor1 and
motor2
Motor-shifting can be controlled after the terminal is
valid.
36
Shift the command to the
keypad
After the function terminal become valid, the running
command channel will be shifted into keypad running
command channel and the running command channel
will come back to the original state if the function
terminal is invalid.
37
Shift the command to the
terminals
After the function terminal become valid, the running
command channel will be shifted into terminal running
command channel and the running command channel
will come back to the original state if the function
terminal is invalid.
38
Shift the command to the
communication
After the function terminal become valid, the running
command channel will be shifted into communication
running command channel and the running command
channel will come back to the original state if the
function terminal is invalid.
39 Pre-excitation command
Perform pre-exciting if the terminal is valid until the
terminal is invalid.
40 Power consumption clear
The power consumption will be cleared after the
command is valid.
41 Power consumption retention
If the command is valid, the current running of the
inverter will not affect its power consumption.
42~60
Reversed
Relative parameters list:
Function
code
Name Detailed instruction of parameters
Default
value
P05.00 HDI input type selection
0:HDI is high pulse input 0