INVT Goodrive 200 - Page 178

Goodrive200 inverters Basic operation instruction
177
Function code
Name Detailed instruction of parameters
Default
value
P00.03
Max. output
frequency
P00.03~400.00Hz 50.00Hz
P00.06
A frequency
command
0:Keypad data setting
1:Analog AI1 setting
2:Analog AI2 setting
3:Analog AI3 setting
4:High-speed pulse HDI setting
5:Simple PLC program setting
6: Multi-step speed running setting
7: PID control setting
8:MODBUS communication setting
9:PROFIBUS communication setting
10:Ethernet communication
setting(reserved)
11:CAN communication setting(reserved)
0
P00.11 ACC time 1 0.0~3600.0s
Depend
on
model
P00.12 DEC time 1 0.0~3600.0s
Depend
on
model
P05.01~P05.09
Digital input
function
selection
26:Traverse Pause(stop at the current
frequency)
27:Traverse reset(return to the center
frequency)
P08.15 Traverse range
0.0~100.0%(relative to the set frequency) 0.0%
P08.16
Sudden jumping
frequency range
0.0~50.0%(relative to the traverse range) 0.0%
P08.17
Traverse boost
time
0.1~3600.0s 5.0s
P08.18 Traverse 0.1~3600.0s 5.0s