INVT Goodrive 200 - Page 77

Goodrive200 inverters Function codes
76
Functio
n code
Name
Detailed instruction of parameters
Default
value
Modify
switching-
off
delay time
P05.32
L
ower limit of
AI1
0.00V
○
P05.33
Correspondi
ng setting of
the lower
limit of AI1
0.0%
○
P05.34
Upper limit of
AI1
10.00V
○
P05.35
Correspondi
ng setting of
the upper
limit of AI1
100.0%
○
P05.36
AI1 input
filter time
0.100s
○
P05.37
L
ower limit of
AI2
0.00V
○
P05.38
Correspondi
ng setting of
the lower
limit of AI2
0.0%
○
P05.39
Upper limit of
AI2
10.00V
○
P05.40
Correspondi
ng setting of
the upper
limit of AI2
100.0%
○
P05.41
AI2 input
filter time
0.100s
○
P05.42
L
ower limit of
T
he function code defines the relationship between
the analog input voltage and its c
orresponding set
value. If the analog input voltage beyond
the set
minimum or maximum input value, the inverter will
count at the minimum or maximum one.
W
hen the analog input is the current input, the
corresponding voltage of 0~20mA is 0~10V.
In different cases, the corresponding rated
value of
100.0% is different. S
ee the application for detailed
information.
The figure below illustrates different applications:
Input filter
time: this parameter is used to adjust the
sensitivity of the analog input. In
creasing the value
properly can enhance the anti-
interference of the
analog, but weaken the sensitivity of the analog input
Note: Analog AI1 and AI2 can support 0~10V
or
0~20mA input, when AI1 and AI2 selects
0~20mA
input, the corresponding voltage of 20mA is 5V
. AI3
can support the output of -10V~+10V.
-10.00V
○