INVT Goodrive 35 Series - Page 119

Goodrive35 inverters Function codes
118
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
LED tens: low-speed carrier frequency limit mode
0: Low frequency and carrier frequency dropping
1: Low frequency and no carrier frequency dropping
Hundreds: dead zone compensation
0: Method 1
1: Method 2
The function code is only valid when P0.00=2, and
when the carrier frequency is more than 4k, it will
drop to 4k automatically.
P08.41
Over
commissio
n selection
Ones: Overcommission selection
0: Invalid
1: Valid
Tens: Heavy overcommission factor
0~9
0x01
◎
P08.42
Keypad
data
control
0x000~0x1223
LED ones: frequency enable selection
0: Both ∧/∨ keys and digital potentiometer
adjustments are valid
1: Only ∧/∨ keys adjustment is valid
2: Only digital potentiometer adjustments is valid
3: Neither ∧/∨ keys nor digital potentiometer
adjustments are valid
LED tens: frequency control selection
0: Only valid when P00.06=0 or P00.07=0
1: Valid for all frequency setting manner
2: Invalid for multi-step speed when multi-step speed
has the priority
LED hundreds: action selection during stopping
0: Setting is valid
1: Valid during running, cleared after stopping
2: Valid during running, cleared after receiving the
stop command
0x000
0
○
www.barghmaher.ir