INVT Goodrive 35 Series - Page 62

Goodrive35 inverters Function codes
61
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
lines (U, V and W). The motor rotation direction can
be changed by QUICK/JOG on the keypad. Refer to
parameter P07.02.
Note: When the function parameter comes back to
the default value, the motor’s running direction will
come back to the factory default state, too. In some
cases it should be used with caution after
commissioning if the change of rotation direction is
disabled.
2: Forbid to run in reverse direction: It can be used in
some special cases if the reverse running is
disabled.
P00.14
Carrier
frequency
setting
The relationship table of the motor type and carrier
frequency:
Model
The factory value
of carrier
frequency
380V
1.5~11kW
8kHz
15~55kW
4kHz
Above 75kW
2kHz
660V
22~55kW
4kHz
Above 75kW
2kHz
The advantage of high carrier frequency: ideal
current waveform, little current harmonic wave and
motor noise.
The disadvantage of high carrier frequency:
increasing the switch loss, increasing inverter
Depend
on
model
○
www.barghmaher.ir