INVT Goodrive 35 Series - Page 79

Goodrive35 inverters Function codes
78
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
frequency
of forward
rotation
P03.15=1.
Setting range:0.00 Hz~P00.03 (the Max. output
frequency)
P03.17
Keypad
setting for
upper
frequency
of reverse
rotation
50.00
Hz
○
P03.18
Upper
electromoti
on torque
source
This function code is used to select the
electromotion and braking torque upper-limit setting
source selection.
0:Keypad setting upper-limit frequency(P03.20 sets
P03.18, P03.21 sets P03.19)
1: AI1
2: AI2
3: AI3
4: HDI
5:MODBUS communication
6:PROFIBUS/CANopen communication
7:Ethernet communication
Note: setting mode 1~7,100% corresponds to three
times of the motor current.
0
○
P03.19
Upper
braking
torque
source
0
○
P03.20
Keypad
setting of
electromoti
on
torque
The function code is used to set the limit of the
torque.
Setting range:0.0~300.0%(motor rated current)
180.0
%
○
P03.21
Keypad
setting of
braking
torque
180.0
%
○
www.barghmaher.ir