IP-COM Pro-6-IW - Page 53

Version V1.0
46
Parameter description
Parameter
Description
Wireless Network
It specifies whether to enable the wireless function of the AP.
Country/Region
It specifies the country or region where the AP is used. This parameter helps
comply with channel regulations of the country or region. This parameter can be
set if Lock Channel is not selected.
Network Mode
It specifies the wireless network mode of the AP. This parameter can be set if Lock
Channel is not selected.
Available options for 2.4 GHz are 11b, 11g, 11b/g, 11b/g/n and 11b/g/n/ax.
−
11b: The AP works in 802.11b mode and only wireless devices compliant with
802.11b can connect to the 2.4 GHz wireless networks of the AP.
−
11g: The AP works in 802.11g mode and only wireless devices compliant with
802.11g can connect to the 2.4 GHz wireless networks of the AP.
−
11b/g: The AP works in 802.11b/g mode and only wireless devices compliant
with 802.11b or 802.11g can connect to the 2.4 GHz wireless networks of the
AP.
−
11b/g/n: The AP works in 802.11b/g/n mode. Wireless devices compliant with
802.11b or 802.11g and wireless devices working at 2.4 GHz and compliant
with 802.11n can connect to the 2.4 GHz wireless networks of the AP.
−
11b/g/n/ax: The AP works in 11b/g/n/ax mode. Wireless devices compliant
with 802.11b, or 802.11g and wireless devices working at 2.4 GHz and
compliant with 802.11n or 802.11ax can connect to the 2.4 GHz wireless
networks of the AP.
Available options for 5 GHz are 11a, 11a/n, 11ac and 11a/n/ac/ax.
−
11a: The AP works in 802.11a mode and only wireless devices compliant with
802.11a can connect to the 5 GHz wireless networks of the AP.
−
11a/n: The AP works in 802.11a/n mode and only wireless devices compliant
with 802.11a or 802.11n can connect to the 5 GHz wireless networks of the AP.
−
11ac: The AP works in 802.11ac mode and only wireless devices compliant
with 802.11ac can connect to the 5 GHz wireless networks of the AP.
−
11a/n/ac/ax: The AP works in 11a/n/ac/ax mode. Wireless devices compliant
with 802.11a, or 802.11ac and wireless devices working at 5 GHz and
compliant with 802.11n or 802.11ax can connect to the 5 GHz wireless
networks of the AP.
Channel
It specifies the operating channel of the AP. This parameter can be set if Lock
Channel is not selected.
Auto: It indicates that the AP automatically adjusts its operating channel according
to the ambient environment.