Need help?Do you have a question about the IP-COM AP325 and is the answer not in the manual?
General| 5 GHz | No |
|---|---|
| 2.4 GHz | Yes |
| Operating modes | AP, WDS, Client+AP |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Input current | 1 A |
| AC input voltage | 12 V |
| Power consumption (max) | 8 W |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Placement | Ceiling |
| Certification | FCC/CE/RoHS |
| Product color | White |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | -10 - 45 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| VPN support | PPTP, L2TP |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Antenna type | Internal |
| Antennas quantity | 2 |
| Antenna direction type | Omni-directional |
| Antenna gain level (max) | 4 dBi |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Width | 184 mm |
|---|---|
| Height | 38 mm |
Describes the AP325's features, operation band, and target applications.
Provides step-by-step instructions for mounting the AP on a ceiling, including required tools.
Guides users through setting up WiFi without an IP-COM management router or AP controller.
Explains how to set up WiFi networks using an IP-COM AP controller for centralized management.
Details setting up WiFi networks via an IP-COM router that supports AP management.
Configures LAN settings, including IP address type, static or dynamic assignment, and subnet mask.
Covers setting SSID, security mode, and encryption for WiFi networks.
Covers upgrading AP firmware, setting system time, and configuring login timeout.
Explains how to back up, restore, and reset AP configurations to factory defaults.
To Next Page
