Wireless Access Point
User Guide
3 Quick setup
3.1 Overview
This chapter is about how to set up WiFi network for APs in different scenarios. Please select one method
for internet setup according to your scenario.
3.2 Setting up WiFi network without an IP-COM
management router/AC
1. Connect devices.
(1) Ensure that your router is connected to the internet.
(2) Ensure that your router and PoE switch are connected to power supply.
(3) Connect your computer and PoE switch to LAN ports of the router using Ethernet cables.
(4) Connect LAN port of your AP to a PoE port of your PoE switch using an Ethernet cable.
The network topology is shown as follows:
To Next Page
Loading...
