Wireless Access Point
User Guide
5 Status
5.1 System status
This page displays the system status and LAN port status of the AP. To access the page, click Status >
System Status.
Parameter description
Parameter Description
Device Name
It specifies the name of the AP. You can change the AP’s name on Network > LAN
Setup page.
System Time It specifies the current system time of the AP.
Uptime It specifies the time that has elapsed since the AP starts up this time.
Number of Clients It specifies the number of wireless devices connected to the AP currently.
Firmware Version
It specifies the current firmware version number of the AP. If you have upgraded
the firmware version of the AP, view the current firmware version here to check
whether the upgrade is successful.
Hardware Version It specifies the current hardware version number of the AP.
MAC Address
It specifies the physical address of the AP’s LAN port. If you connect the AP to
18
To Next Page
Loading...