Wireless Access Point
User Guide
8.1.3 Examples
Setting up a non-encrypted WiFi network
Networking requirement
In a hotel, guests can connect to the WiFi network without a password and access the internet through
the WiFi network.
Procedures:
Assume that the second SSID of the AP, the WPA2-PSK security mode, and AES encryption algorithm are
used.
1. Choose Wireless > Basic.
2. Select the second SSID from the SSID drop-down list box, which is IP-COM_888889 in this example.
3. Tick the Enable box.
4. Set the value of the SSID box to Free.
5. Security Mode: Select None.
6. Click Save.
To Next Page
Loading...
