Wireless Access Point
User Guide
Parameter Description
Isolate Client
−
Enable: It indicates that the wireless devices connected to the AP with the
selected SSID cannot communicate with each other, which improves WiFi
network security.
−
Disable: It indicates that the wireless devices connected to the AP with the
selected SSID can communicate with each other. By default, Isolate Client is
disabled.
WMF
−
Enable: It indicates that the WMF function is enabled.
−
Disable: It indicates that the WMF function is disabled. By default, WMF
function is disabled.
Probe Broadcast
Packets Control
−
Enable: It indicates that the Probe Broadcast Packets Control function is
enabled.
−
Disable: It indicates that the Probe Broadcast Packets Control function is
disabled. By default, the function is disabled.
Max. Number of
Clients
It specifies the maximum number of devices that can be concurrently connected to
the WiFi network corresponding to an SSID.
After this upper limit is reached, the AP rejects new requests from devices for
connecting to the wireless network.
A maximum of 128 wireless devices are allowed to connect to the enabled SSIDs of
the AP.
SSID If you want to change the selected SSID, enter the new SSID in this box.
Chinese SSID
Encoding
It specifies the encoding format of Chinese characters in an SSID. The default value
is UTF-8. This parameter takes effect only if the SSID contains Chinese characters.
Security Mode
It specifies the security mode of the selected SSID. The options include: None, WEP,
WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK, WPA and WPA2. If you want to
change the security mode of the selected SSID, click the drop-down list box and
select your desired mode from it.
38
To Next Page
Loading...
