IP-COM AP325 - Network Configuration; LAN Setup and IP Address Configuration

Wireless Access Point
User Guide
7 Network
7.1 LAN setup
This page enables you to check the MAC address of your AP’s LAN port, set the LAN port’s IP address type
and other parameters. To access the page, click Network > LAN Setup.
Parameter description
Parameter Description
MAC Address It specifies the MAC address of the AP’s LAN port.
IP Address Type
It specifies how the AP gets its IP address. The default option is Static.
−
Static: It indicates that the AP has static IP address information. In this
condition, you need to set IP address, subnet mask, gateway, and DNS server
information for the AP manually.
−
Dynamic: It indicates that the AP gets IP address, subnet mask, gateway, and
DNS server information from a DHCP server in your LAN network
automatically.
Tip
If IP Address Type is set to Dynamic, you should log in to the web UI of the AP using
the AP’s dynamic IP address assigned by the DHCP server. To get the AP’s dynamic
27