IP-COM Pro-6-IW - Configure the QVLAN Function

Version V1.0
63
6.8.2 Configure the QVLAN Function
1. Choose Wireless > QVLAN Settings.
2. Enable QVLAN Settings.
3. Change the parameters as required. Generally, you only need to change the 2.4 GHz SSID
VLAN ID and 5 GHz SSID VLAN ID settings.
4. Click Save.
---End
Parameter description
Parameter
Description
Enable
It specifies whether to enable the QVLAN function of the AP. By default, it is
disabled.
*
*
*