It specifies the WMM optimization modes supported by the AP:
−
Optimized for scenario with 1 - 10 users: If 10 or less clients are connected
to the AP, you are recommended to select this mode to obtain higher
client throughput.
−
Optimized for scenario with more than 10 users: If more than 10 clients
are connected to the AP, you are recommended to select this mode to
ensure client connectivity.
−
Custom: This mode enables you to set the WMM EDCA parameters for
manual optimization.
−
If the check box is selected, the No ACK policy is adopted.
−
If the check box is deselected, the Normal ACK policy is adopted.
To Next Page
Loading...
