4230 Flow Meter
Section 4 Optional Equipment
4-33
4.12 Mechanical Totalizer A mechanical totalizer is available for the Model 4250 that con-
sists of a seven-digit, non-resettable mechanical counter
mounted in the front panel. It must be ordered with the flow
meter. The totalizer advances according to program selections for
units of measure and the maximum flow of the primary device
used. The totalizer is internally set to advance at 1⁄ 100 of the
rate of the display totalizer. Consequently, you must multiply the
number shown on the mechanical totalizer by 100 to determine
the actual value for total flow.
To Next Page
Loading...
