ISHIDA Astra - Open Price Setup (B07); Open Price Setup

page 26 ASTRA • Operation Manual • Rev. 0124C
Chapter 3. Setup Mode
➝
➝
7
➝
ENTER
1
ENTER
➜
Example: Select “1”
END
or
➜
➝
ZERO
MODE
Note: Refer to page 14, Section 3.1 to enter the Setup Mode.
3.9 Open Price Setup
PROCEDURES
1 Press the DOWN ARROW key ( ) until
the Open Price menu (b07) appears or
key in “7” followed by the DOWN
ARROW key ( ) to enter the menu
directly.
2 Press the ENTER key to enter the
Open Price Selection menu (b07-01).
Note: This step is used to select if the operator
can make temporary price changes.
3 Key in “0” or “1” and press the
ENTER key.
0 : Open price
1 : Prohibition of temporary price changes
Note: Number “0” is the default value.
4 Press the END key to return to the
LABEL menu (b01).
5 Press the MODE key to return to
Normal Operation mode after all
SETUP mode procedures are
completed.