page 40
ASTRA
• Operation Manual • Rev. 0124C
Chapter 4. Registration Mode
➝
ENTER
➝
➝
or
➜
➝
4
Note: Refer to Section 4.1 to enter the Registration mode.
4.5.3 Deleting All Preset Keys
PROCEDURE
1 Press the DOWN ARROW key ( ) until
the Preset Key menu (P04) appears or
key in “4” followed by the DOWN
ARROW key ( ) to enter the menu
directly.
2 Press the ENTER key to enter the
Preset menu (P04-01).
3 Press the DOWN ARROW key ( ) to
enter the step to delete all preset key
data.
4 Press the ENTER key and then press
the ZERO key twice to delete all
preset key data.
Note: The OK buzzer sounds to notify the
operator that the deletion has been
completed.
5 Press the END key to return to the
PLU setup menu (P01).
6 Press the MODE key to return to
normal operation mode after all
operations of Registration Mode are
completed.
➝
➝
ENTER
ZERO ZERO
➜
END
MODE
ZERO