ASTRA
• Operation Manual • Rev. 0124C page 33
Chapter 4. Registration Mode
➝
ENTER
➜
Example: PLU “5”
5
➝
➝
or
➜
1
➝
or
PLU
FILE
2
Note: Refer to Section 4.1 to enter the Registration mode.
PLU
4.2.1 Deleting a PLU
PROCEDURES
1 Press the DOWN ARROW key ( ) until
the PLU menu (P01) appears or key in
“1” followed by the DOWN ARROW
key ( ) to enter the menu directly.
Press the PLU FILE key to enter
menu directly.
Press the ENTER key to enter the
PLU Number step (P01-01) to delete
PLUs.
3 Key in the PLU number (Max. 6 digits)
and press the PLU key.
4 Press the DELETE key twice to delete
the PLU.
Note: The OK buzzer sounds when the PLU is
deleted.
5 Press the END key to return to the
PLU menu (P01).
6 Press the MODE key to return to
normal operation mode after all
operations of Registration Mode are
completed.
END
MODE
DELETE DELETE