CCI.TECU – Introduction
Pos: 1 /CC -Is obu s/Ei nlei tu ng @ 8\ mod_1273561492335_6.doc @ 119978 @ 1
1 Introduction
1.1 About these operating instructions
These Operating Instructions are intended as an introduction to the operation and
configuration of the CCI.TECU app. This app is preinstalled on your ISOBUS
terminal CCI 100/200 and can only be run from there. It is only with knowledge of
these operating instructions that accidental misuse can be avoided and fault-free
operation ensured.
These operating instructions must be read and understood prior to setting up the
software to avoid problems in the application.
1.2 Reference
These operating instructions describe the CCI.TECU version CCI.TECU v6.
In order to query the version number of the CCI.TECU installed on your CCI
ISOBUS terminal, proceed as follows:
1. Press the home key to enter the main menu.
2. Press the "Settings" button (F1) in the main menu.
3. Select the tab Info and Diagnostics.
4. In the tab Info and Diagnostics press the button "Terminal".
5. Press the "Software" button on the touchscreen.
The version of the terminal software component is indicated In the
information field that is now displayed.
4
To Next Page
Loading...