isobus VT50 - CCI.TECU Buttons and Icons

CCI.TECU – Buttons and icons
8 Buttons and icons
CCI.TECU Tractor list
Hectare counter Set working position
Change between wheel and ground speed
sensor
Power take off speed
3-point hitch position Ground speed sensor is selected
Implement in transport position Implement in working position
Wheel speed sensor is selected. Overview
Comment Tractor settings
Speed Power take off
3-point hitch
Wheel speed sensor
Ground speed sensor
PTO sensor 3-point hitch sensor
Wheel speed sensor PTO settings
Ground speed sensor Hectare counter source
Start flag Target flag
Calibrate Establish maximum 3-point hitch position
Establish minimum 3-point hitch position
Time
Distance Area
Working width Reset time
Reset distance Reset area
Process Copy
Delete Add
41