VT50 – Safety
2.2 Intended use
The terminal is exclusively intended for use on approved implements and devices
in agriculture. Any other installation or use of the terminal is not included within the
manufacturer's area of responsibility.
The manufacturer accepts no liability for any resulting personal injury or material
damage. Any risks for unintended use are borne solely by the user.
Observance of the operation and maintenance conditions stipulated by the
manufacturer also form part of intended use.
The accident prevention regulations in force, as well as other generally recognised
safety, industrial, medical and traffic laws must be observed. Unauthorised
modifications to the device exclude the manufacturer's liability.
2.3 Safety indications for the operator / user
• Do not remove any safety mechanisms or signs.
• Disconnect the power supply to the terminal during maintenance work or
when using a charging device on the battery of the towed/production
implement.
• Never perform maintenance work or repairs when the device is switched on.
• Disconnect the power supply to the terminal beforehand when welding on
the tractor or on an attached implement.
• Only use a soft cloth moistened with clean water or a small amount of glass
cleaning agent to clean the terminal.
• Use your fingertip to operate the keys. Avoid using your finger nails.
• If, after having read these operating instructions, there are sections which
you do not understand contact your dealer for clarification before using the
terminal.
• Carefully read and observe all safety instructions in the manual and the
safety labels on the device. Safety labels must always be in a proper legible
condition. Replace missing or damaged labels. Ensure that new device parts
are provided with the current safety labels. Spare labels can be obtained
from your authorised dealer.
• Learn how to use the terminal in accordance with regulations.
• Keep the terminal and accessories in good condition.
6
To Next Page
Loading...