VT50 – Safety
2 Safety
These operating instructions contain basic indications which must be observed
during configuration, operation and service. As such, it is absolutely essential to
read these instructions prior to configuration and operation.
Not only do the general safety indications listed in this "Safety" chapter have to be
observed but also the special safety instructions appearing in other chapters as
well.
2.1 Identification of indications in the operating instructions
The safety indications in these operating instructions are specially identified:
Warning - General Hazards!
This occupational safety symbol identifies general safety indications the non-
observance of which poses a danger for life and limb. Carefully observe the
indications regarding occupational safety and exert particular caution in these
Attention!
This attention symbol identifies all safety indications which refer to regulations,
directives or working procedures which it is essential to observe. Non-observance
can entail damage to, or the destruction of, the terminal as well as malfunctions.
Note
The note symbol highlights operation tips and other particularly useful information.
5
To Next Page
Loading...