VT50 – Troubleshooting
6 Troubleshooting
6.1 Terminal errors
The following overview shows possible terminal errors and how to solve them:
Error Possible cause Rectification
The terminal does not switch
on
• Terminal is not correctly
connected
• Check ISOBUS
connection
• Ignition is not switched on • Start tractor
The software of the connected
implement is not displayed
• Bus terminator missing
• Check resistance
• Software is loaded,
however is not displayed
• Check whether the
software can be
manually started from
the terminal main menu
• Connection error when
uploading the software
• Check physical
connection
• Contact the implement
manufacturer's customer
service
61
To Next Page