VT50 ā Introduction
Pos: 1 /CC -Is obu s/Ei nlei tu ng @ 9\ mod_1287407057879_6.doc @ 148605 @ @ 1
1 Introduction
These operating instructions are intended as an introduction to the operation and
configuration of the VT50 Terminal. It is only with knowledge of these operating
instructions that accidental misuse of the terminal can be avoided and fault-free
operation ensured.
These operating instructions must be read and understood prior to assembly and
commissioning to prevent problems during operation. The company <company
name> accepts no liability for damage resulting from the failure to observe these
operating instructions.
1.1 About the VT50
The VT50 is an operation terminal for control of implements; it is available in two
versions: Basic and Comfort.
A list of the different components of these two versions can be found in chapter
7.3.
The following CCI.Apps are supplied with the VT50:
CCI.Cam (
Comfort)
Visual implement monitoring
CCI.TECU
Tractor data
4
To Next Page
Loading...