VT50 – Commissioning
Pos: 7 /CC -Isobu s/Inst alla tion @ 9\ mod_1287407065114_6.doc @ 148633 @ @ 1
4 Commissioning
4.1 Mounting the terminal
The device support for fixing the terminal to the tractor cab is included in the scope
of delivery.
Proceed as follows to mount the terminal in the cab:
1.
2.
3.
4.
5.
6.
a. Assemble the device support (Figures 1 and 2).
b. Mount the device support to the frame and to the terminal (Figures 3 and 4).
c. Select a suitable position in the tractor cab (within the driver's field of vision) for
fitting the terminal (Figures 5 and 6).
d. Secure the terminal with the device support in the tractor cab.
Note
Ensure that the screws are tightened firmly.
Secure the terminal so that it can be read and operated easily and so that it does
not hinder access to the operating elements of the tractor or block the view outside.
17
To Next Page
Loading...