CCI.TECU – Operation
4.5.1 Enter working width
Proceed as follows to enter the working width of the active implement:
1. Press on the button "Working Width" on the touchscreen or press on the scroll
wheel.
2. Enter the new value on the touchscreen using the digit field or the slider.
3. Confirm your entry with "OK".
Note
The valid range for the working width lies between 0.0 and 99.0 metres.
Note
The value entered for the working width must be as accurate as possible to enable
an exact calculation of the area processed.
Pos: 11 /C C-Is ob us/P robl e mbe hebu ng @ 8\ mod_1274441518516_6.doc @ 121418 @ 122334444442
35
To Next Page
Loading...