isobus VT50 - ISB Button and Stop Switch Functions

VT50 – Structure and function
3.4.1 ISB button (
→
Basic)
If the terminal ISB button is pressed, a stop command is sent to the implement.
Hence in a danger situation the corresponding automatic measures can be
initiated.
Warning – Danger of injury by the implement whilst in operation!
Not all implements support the stop function. As a result, an implement may
continue to operate after the ISB button has been pressed. This can lead to
injuries.
• Please refer to the operating instructions of the implement to verify whether
the function is supported or not.
3.4.2 Stop switch (
→
Comfort)
If the terminal stop switch, which is designed as a palm button, is pressed, a stop
command is sent to the implement. Hence in a danger situation the corresponding
automatic measures can be initiated.
Warning – Danger of injury by the implement whilst in operation!
Not all implements support the stop function. As a result, an implement may
continue to operate after the stop switch has been pressed. This can lead to
injuries.
• Please refer to the operating instructions of the implement to verify whether
the function is supported or not.
13