VT50 – Operation
5.3.5.1 Activate/deactivate beeper
If the beeper is active, then you receive an acoustic acknowledgement upon
touching a button in the touchscreen or one of the function keys.
To activate/deactivate the beeper, proceed as follows:
2. Press on the "Beeper active" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
3. Enter the Boolean value.
4. Confirm your entry with "OK".
5.3.5.2 Enter volume
To enter the beeper volume, proceed as follows:
1. Press on the "Volume" button on the touchscreen or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the digit field or the slider.
3. Confirm your entry with "OK".
Note
The value for the volume is given as a percentage and can be adjusted in steps of
5% in the range 25% to 100%.
32
To Next Page
Loading...