VT50 – Operation
5.3.8.5.7 Display brightness sensor
To display brightness sensor information, proceed as follows:
1. Press on the "Brightness sensor" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A mask opens with the current value of the brightness sensor.
5.3.8.5.8 Test brightness
To test the brightness, proceed as follows:
1. Press on the "Brightness" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A mask opens for testing the brightness.
2. Test the brightness status (F9), manual brightness entry (F10 and F11) and
perform the automatic brightness test (F12).
5.3.8.5.9 Display stop switch
To display the stop switch status, proceed as follows:
1. Press on the "Stop switch" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A mask opens with the current status of the stop switch.
57
To Next Page
Loading...