General
Page 14
1 General
1.1 Documentation
This product manual serves the purpose of a safe use of the item servo positioning controller C 1-Series. It contains safety
notes, which must be complied with.
Further information can be found in the following manuals of the item C Series product range:
Product Manual "item Servo Positioning Controller C 3-Series": Description of the technical data and the device functionality
plus notes concerning the installation and operation of
C 3-05 and C 3-10 servo positioning controllers.
Product Manual “FSM 2.0 - STO”: Description of the technical data and device functionality plus notes on the installation and
operation of the FSM 2.0 – STO.
PROFIBUS Manual “item Servo Positioning Controller C Series”: Description of the implemented PROFIBUS-DP protocol.
CANopen Manual “item Servo Positioning Controller C Series“: Description of the implemented CANopen protocol as per
DSP402.
EtherCAT Manual “item Servo Positioning Controller C Series”: Description of the implemented EtherCAT protocol (CoE)
(German version).
You can find all these documents on our homepage at the download area (http://www.item24.com).
Certificates and declarations of conformity for the products described in this manual can be found at
http://www.item24.com.
The entire software functionality of the new item C Series product range will be implemented in the course of a step-by-step
development process.
This version of the product manual contains the functions of the firmware version 4.1.7001.1.1.
To Next Page
Loading...
