Electrical installation
Page 80
8.3 Connection: Power supply [X9]
The item servo positioning controller C 1-Series receives its 24 VDC power supply for the control electronics via connector
[X9].
The mains voltage supply is single-phase. As an alternative to AC feed or for the purpose of DC bus coupling a direct DC supply
for the DC bus is possible.
8.3.1 Device side [X9]
C 1-02 and C 1-05 PHOENIX MINI-COMBICON MC1.5/9-G-5.08 BK
C 1-08 PHOENIX COMBICON MSTBA 2,5/9-G-5.08 BK
8.3.2 Counterplug [X9]
C 1-02 and C 1-05 PHOENIX MINI-COMBICON MC1.5/9-ST-5.08 BK
C 1-08 PHOENIX COMBICON MSTB 2,5/9-ST-5,08 BK
C 1-02 and C 1-05 PHOENIX MINI-COMBICON connector housing 12-pole,
KGG-MC1,5/12 BK
C 1-08 PHOENIX COMBICON connector housing 12-pole,
KGS-MSTB 2,5/9 BK
Coding to PIN 9 (GND24V)
To Next Page
Loading...
