ITEM C 1-Series User Manual

General
Page 15
1.2 Scope of supply
The scope of supply includes:
Table 1: Scope of supply
1x
item Servo Positioning Controller C 1-Series
Type C 1-02 C 1-05 C 1-08
item order number 0.0.668.62 0.0.668.63 0.0.668.64
Counterplugs for power are included in standard scope of supply. Counterplugs for controller or shaft encoder connections, as
well as for shield connection are not included in the standard scope of supply. They can, however, be ordered as accessories.
Table 2: Connector set: POWER connector
1x
Connector set: POWER connector
This plug set contains the counterplugs for the following connections:
- Supply [X9]
- Motor connection [X6]
Type C 1-02 C 1-05 C 1-08
item order number available on request available on request
Table 3: Connector set: DSUB connector
1x
Connector set: DSUB connector
This connector set includes the counterplugs for the following connections:
- I/O interface [X1]
- Angle encoder connection [X2A]
- Angle encoder connection [X2B]
- CAN fieldbus interface [X4]
- Incremental encoder input [X10]
- Incremental encoder output [X11]
Type C 1-02 C 1-05 C 1-08
item order number available on request
Table 4: Connector set: Shield connector
1x
Connector set: Shield connector
This connector set includes two shield terminals (SK14)
Type C 1-02 C 1-05 C 1-08
item order number 0.0.668.19

ITEM C 1-Series Specifications

General

Brand	ITEM
Model	C 1-Series
Category	Controller
Language	English