ITEM C 1-Series User Manual

Safety notes for electrical drives and controllers
Page 21
Without claiming completeness, the following regulations and others apply:
VDE 0100 Erection of power installations with nominal voltages up to 1000 V
EN 1037 Safety of maschinery - Prevention of unexpected start-up
EN 60204-1 Safety of machinery - Electrical equipment of machines
Part 1: General requirements
EN 61800-3 Adjustable speed electrical power drive systems
Part 3: EMC requirements and specific test methods
EN 61800-5-1 Adjustable speed electrical power drive systems
Part 5-1: Safety requirements - Electrical, thermal and energy
EN 61800-5-2 Adjustable speed electrical power drive systems
Part 5-2: Safety requirements - Functional
EN ISO 12100
Safety of machinery - General principles for design - Risk assessment and risk reduction
EN ISO 13849-1 Safety of machinery - Safety-related parts of control systems
Part 1: General principles for design
EN ISO 13849-2 Safety of machinery - Safety-related parts of control systems
Part 2: Validation
More standards to be respected by the user:
EN 574 Safety of machinery - Two-hand control devices
EN 1088 Safety of machinery - Interlocking devices associated with guards
EN ISO 13850 Safety of machinery - Emergency stop

ITEM C 1-Series Specifications

General

Brand	ITEM
Model	C 1-Series
Category	Controller
Language	English