ITEM C 1-Series User Manual

Safety notes for electrical drives and controllers
Page 23
accidentally be put into action.
This does not apply to drives with the special “Safe Stop” feature in accordance with EN 954-1 CAT 3 or with
the “Safe Torque Off” feature in accordance with EN 61800-5-2.
This feature can be achieved with the item C 1-Series by integrating the module FSM 2.0 – STO for example.
Initial operation must be carried out with idle motors, to prevent mechanical damages for example due to the
wrong direction of rotation.
Electronic devices are never fail-safe. It is the user’s responsibility, in the case an electrical device fails, to
make sure the system is transferred into a secure state.
The servo positioning controller and in particular the brake resistor, externally or internally, can assume high
temperatures, which may cause serious burns.

ITEM C 1-Series Specifications

General

Brand	ITEM
Model	C 1-Series
Category	Controller
Language	English