Product description
Page 30
User-friendly parameterisation with the item Motion Soft
®
software
Menu-driven first set up
Automatic motor identification
Easy coupling to host controller, for example to a PLC via I/O level or fieldbus
High-resolution 16-bit analog input
Technology slots for extensions such as I/O extension module or PROFIBUS interface.
Note: Depending on the current consumption, only one technology module with an additional fieldbus interface may be used
Option “STO” (Safe Torque Off, corresponds to EN 60204 Stop 0), SIL 3 in accordance with ISO EN 61800-5-2 / PL e in
accordance with ISO EN 13849-1
To Next Page
Loading...
