To Next Page

To Previous Page

0830

0830 ACTUAT.FRQ 1

XX.X Hz

Required frequency 1 for Actuator (digital)

Possible settings: 0.0 – MAX. FREQ. [0245]

Set the frequency with either ▲ or ▼

The selected frequency in this parameter is only active in the Actuator mode if Parameter

C.REQ.VAL.1 [0805] is set to digital, and Parameter SW REQ.VAL [0815] is set to Setpoint 1

or the ACTUATOR FREQUENCY 1 is selected via digital input.

0835

0835 ACTUAT.FRQ 2

XX.X Hz

Required frequency 2 for Actuator (digital)

Possible settings: 0.0 – MAX. FREQ. [0245]

Set the frequency with either ▲ or ▼

The selected frequency in this parameter is only active in the Actuator mode if Parameter

C.REQ.VAL.2 [0810] is set to digital, and Parameter SW REQ.VAL [0815] is set to Setpoint 2

or the ACTUATOR FREQUENCY 2 is selected via digital input.

Questions and Answers:

Need help?

Do you have a question about the ITT HYDROVAR Series and is the answer not in the manual?

ITT HYDROVAR Series Specifications

General