Jands Stage CL - Page 48

EditingtheCuelist Cuelists
SettingaCueFadetime
When you record a cue it is automatically set to th
you want to change the fade time for a cue you do this:
1. On the Cuelist window press the Cuelist tab button. Stage C
Cues list.
2. Touch in the fade column of the Cue you want to
rotate the touchscreen dial until the fade setting
down on the touchscreen dial. The field changes
are editing it.
e default cuelist fade time. If
L displays the
change or hold shift and
is highlighted then press
colour to indicate that you
C Cue
You can copy and paste a cue to ano
1. Cueli Cu st window.
2 Touch the nam the dial until the cue
name is highlighted.
3. Touch the Cop
4 ce an e e OR
. To insert a new Cue touch on the cue after the location you want to insert
and touch Insert.
Updating Cue
To update a cue you do this:
lay the cue yo
se the fixture
. Press the Cuelist tab button. Stage CL displays the Cuelist list window.
4.
cue
5. Touch the Update button at the bottom of the touchscreen. Stage CL displays
the update confirmation window.
6. Press Yes to complete the change.
3. Rotate the touchscreen dial to set a fade time in seconds.
When you play this cue it will now fade in over the time you have set.
 You can change the default Cuelist fade time in the Setup > Preferences
window. See Preferences on page 11-3
opyinga 
ther location in the cuelist. To do this:
Press the st tab button. Stage CL displays the elist li
e of the Cue you want to copy rotate or.
y button at the bottom of the touchscreen.
. To repla xisting Cue touch on a cue name and press Past
5
a 
P u want to update. 1.
U faders and colour controls to change the look of the cue. 2.
3
Touch the name of the Cue you want to update or rotate the dial until the
name is highlighted.
8‐10 StageCLUserGuide,Version1.3