Version OS 1.0
12.11 A/B/C/D Copy (11)
The source bar is selected by the (BAR) button of the currently edited track.
Press (Shift/Cancel) - all 16 step LEDs start to blink - then select (Step 11) =
A/B/C/D Copy. The display shows:
Copy A to B
Use BAR to select destin
Now use the (BAR) button to select the destination. Depending on the track length
(Last Step) you can either choose B alone, or B/C, or B/C/D.
Copy A to C
Use BAR to select destin
After your choice has been made, press (Enter) to copy the bar A to your destination.
If you want to copy from another bar, say B, choose the bar
before
you press shift 11
and
then
you can choose the other bars except the source bar.
12.12 Roll/Flam (12)
This function edits the played flam pattern of a flam set to a step of a track.
Press (Shift/Cancel) - all 16 step LEDs start to blink - then select (Step 12) =
Roll/Flam. The display shows:
Roll/Flam= _____________
Double click to set roll
The bar shows the position of the second hit after the actual note. There are 12
positions of bars between the actual step and the next beat.
Now use the (Data) wheel to select another flam pattern. See the bar move and you
can hear the result immediately.
Roll/Flam= _____________
Double click to set roll
There are 60 different flam patterns.
Roll/Flam= ____________
Double click to set roll
Select your desired flam pattern and press (Enter) to leave the function.
Note: every track has its own roll/flam pattern.
108 ALPHA BASE Operating Manual