Version OS 1.0
7.3.3 Manually Recording a Sample
• There is also a way of manually triggering the recording:
Press (EDIT/TRIG) (LED=on), select X Sample 1 or 2 and double click on
the instrument key without setting a step in the track. Sample recording is
activated, indicated by a blinking instrument LED.
• Press again (EDIT/TRIG) and leave the edit mode (LED=off).
• As soon as you press the instrument key, the instrument channel starts
recording and the instrument LED goes dark.
• After the recording has been finished, you can play it back by triggering again.
Storing a successfully recorded RAM sample buffer is described in section DISK.
ALPHA BASE Operating Manual 57
To Next Page
Loading...