Need help?Do you have a question about the Jomox ALPHA BASE and is the answer not in the manual?
General| Voices | 11 |
|---|---|
| Analog Voices | 8 |
| Sequencer | Yes |
| Connectivity | MIDI In/Out/Thru, USB |
| Display | LCD |
| Type | Drum Machine |
| Effects | Delay, Reverb |
| Outputs | Main stereo output, headphones output |
| Inputs | 2x 6.3mm Jack Inputs |
| Memory | Pattern |
| Power Supply | External Power Supply |
| Polyphony | 11 |
| Synthesis | Analog and Digital |
Description of onboard digital effects: reverb and delay as send/return effects.
Explanation of the editing process using the 4x4 encoder matrix and display.
Instructions for connecting the power supply and recommended adapter specifications.
Details on main stereo and individual audio outputs, and connection to mixers.
Information on using USB for MIDI, driver requirements, and power considerations.
Details on MIDI In, Out, and Thru ports for external control and synchronization.
Instructions for connecting the MIDI Out jack to other devices.
Information on forwarding MIDI data received on the MIDI In jack.
Information about using the SD card slot for uploading or storing samples.
A guide to get started quickly with basic operations and pattern creation.
Step-by-step instructions for programming a basic drum pattern and setting accents.
Explanation of the 4x4 encoder matrix and associated LEDs for parameter editing.
Description of analog controls including Input Gain, Phones, and Mix Volume.
Controls the input gain for the external input.
Controls the volume for the front headphone jack.
Controls the stereo mix output volume.
Description of sequencer and edit controls like SEQ, CHAIN, X-REC, EDIT/TRIG, DOWN/UP.
Button to activate sequence mode for pitch and parameter changes.
Button to activate the chaining of consecutive patterns.
Button to activate recording mode for sampling external input.
How to enter edit mode and select an instrument/track.
Detailed explanation of editing instrument parameters using encoders and pages.
Detailed parameters for the Kick Drum instrument, covering Tune, Pitch, Decay, Harmonics.
Parameters for Kick Drum Page 1 (Tune, Pitch, Decay, Harmonics).
Parameters for Kick Drum Page 2A (Attack, Pulse, Noise, EQ).
Parameters for Kick Drum Page 2B (PtAtk, PtDec).
Parameters for Kick Drum Page 3 (Compr, MetNz, EVAmt, Gate).
Parameters for Kick Drum Page 4A (LFWav, LFRat, LFInt, Vol).
Parameters for Kick Drum Page 4B (Acc).
Overview and block diagram of the MBrane analog instrument.
Parameters for MBrane Page 1A (Pitc1, Damp1, Pitc2, Damp2).
Parameters for MBrane Page 2A (Cupl1, Cupl2, Noise, Decay).
Parameters for MBrane Page 2B (P1Atk, P1Dec, P2Atk, P2Dc).
Parameters for MBrane Page 3A (NzFil, MtNz1, NzShp, Gate).
Parameters for MBrane Page 3B (E1Amt, MtNz2, E2Amt, Gate).
Parameters for MBrane Page 4A (L1Wav, L1Rat, L1Int, Vol).
Parameters for MBrane Page 4B (L2Wav, L2Rat, L2Int, Acc).
Information on X Sample instruments, their differences from hybrid channels.
Step-by-step guide for recording samples on X Sample instruments.
Introduction to the FM Synth, its operators, and modulation matrix.
Overview of the effects section, reverb and delay, and their integration.
Procedure for loading samples from an SD card.
Instructions for loading and installing OS system files from the SD card.
Restoring the Alpha Base to factory defaults from flash memory.
Restoring presets and patterns from a backup file.
Methods for programming patterns, including step sequencing and live recording.
How to program individual steps (notes) for a pattern.
Programming parameter changes per step (p-locks).
How to set parameter locks for specific steps.
Using p-locks to change instrument selection on a step.
Safely shutting down the Alpha Base unit.
To Next Page
