Version OS 1.0
3.4 Sequencer/Edit Controls
3.4.1 SEQ
This button activates the sequence mode. In sequence mode, the instruments are
played back with different notes (pitch) per step, according to the programming. Also
dynamic parameter locks are played back if this function is activated.
If (SEQ) is off, the machine just triggers every instrument like a classic drum machine
without melodic pitch or p-locks.
3.4.2 CHAIN
This button activates the chaining of consecutive patterns to be played in a sequence.
3.4.3 X-REC
This button activates the recording mode for sampling from external input.
3.4.4 EDIT/TRIG
This button activates the edit mode in which an instrument/track can be selected and
steps of a sequence pattern edited.
3.4.5 DOWN/UP
These buttons do the same as the (DATA) encoder for a selected menu. This is
especially useful if you only want to change single steps of a value. In kit select mode,
you can go up/down through the different kits and load them by pressing (Enter).
24 ALPHA BASE Operating Manual
To Next Page
Loading...