Version OS 1.0
10.4.2 DumpAllKits
Sends the contents of all 128 Single Kits via Midi sysex dump. Set the sysex capable
Midi receiver on record and dump the Kits by pressing (Enter). This takes about 5
seconds. The display shows “busy” while sending and “finish” when the dumping has
been done.
10.4.3 DumpSeq
Sends the contents of the current sequence pattern via Midi sysex dump. Set the sysex
capable Midi receiver on record and dump the sequence by pressing (Enter).
10.4.4 DumpAllSeq
Sends the contents of the first bank of 16 sequence patterns via Midi sysex dump. Set
the sysex capable Midi receiver on record and dump the sequences by pressing
(Enter). This takes about 5 seconds. The display shows “busy” while sending and
“finish” when the dumping has been done.
10.5 Midi Page 4 Sample Sysex Dump Functions
Go right with the cursor to enter the fourth page of the Midi menu. Here you can find
several functions to save samples via sysex (system exclusive) dump. As these functions
are very slow compared to SD card, we have limited the number of samples to 8.
DumpSampl DumpAllSampl
10.5.1 DumpSample
Sends the contents of the currently by <Target> (see DISK) selected sample via Midi
sysex dump. Set the sysex capable Midi receiver on record and dump the sample by
pressing (Enter). This takes about 60 seconds. The display shows “busy” while sending
and “finish” when the dumping has been done.
10.5.2 DumpAllSampl
Sends the contents of the first 8 samples via Midi sysex dump. This takes about 10
minutes. The display shows “busy” while sending and “finish” when the dumping has
been done.
ALPHA BASE Operating Manual 85
To Next Page
Loading...
Need help?
General
