Jomox ALPHA BASE - Delay Parameters Page 1 B

Version OS 1.0
7.5.6 Delay Parameters Page 1 B
On page B you can find the delay parameters:
D
D
T
i
m
e
F
e
e
d
b
S
p
a
t
l
D
e
l
L
L
O
6
4
1
O
O
O
8
8
1
2
7
7.5.6.1 Delay Time
The input signal is just delayed to the output and this parameter controls the time of
the delay.
7.5.6.2 Delay Feedback
A part of the output signal is fed back to the input of the delay line, causing to repeat
the delayed signal to an echo.
7.5.6.3 Delay Spatial
The delayed output signal is flipped from one stereo side to the other each time after
the delay line has run out and wraps back. You can create interesting stereo ping pong
delays with this function. Spatial = <000> just puts the delay to the centre of the
stereo image, while Spatial = <127> spreads the stereo image at maximum.
7.5.6.4 Delay Level
Controls the general delay output level on the mix output.
ALPHA BASE Operating Manual 67