Version OS 1.0
3.3 Menu Controls
3.3.1 DATA
This knob is used for selecting kits or editing of parameters that are chosen by the
(LEFT) and (RIGHT) cursor buttons.
The (Data) wheel has a click function that loads a selected kit or loads a chosen
sample, depending on the menu that is currently selected.
3.3.2 LEFT/RIGHT
These cursor buttons are used for navigation within the display menus.
3.3.3 KIT/SEQ
This button switches between Kit select mode, parameter mode and sequencer mode (if
SEQ is on). In Kit select mode, use the data encoder or (Up/Down) buttons to select a
kit and load it with data click or enter.
3.3.4 DISK
This button opens the disk menu and reads the directory of an inserted SD card.
3.3.5 BPM/MIDI
This button opens the BPM/Midi menu. The first selected item is always BPM control.
22 ALPHA BASE Operating Manual
To Next Page
Loading...