To ensure this, the Compact MPA system makes use of the industrial standardized 100 V line distribuon system. This is a dis-
tribuon system that is based on a xed line level (100V) and where the loudspeaker output power is determined by means
of loudspeaker type and power tapping. Hence, each loudspeaker meeng this line specicaon is equipped with an audio
transformer with several tapping possibilies.
To comply with the environment requirement all loudspeakers used in a PA / GA system must be approved according to
relevant parts of IEC60945 or similar.
Typical loudspeaker data sheets follow:
DNH CAR6T:
To Next Page
Loading...
